Understanding Your Mold Inspection Report
Spore counts, raw counts, and indoor-to-outdoor ratios can look intimidating. Here is how to read a mold lab report in plain English.

You had a mold inspection, the samples went to the lab, and now you have a report full of spore names and numbers. This guide breaks down what those results actually mean so you can make an informed decision.
Raw counts vs. spores per cubic meter
A lab reports both a raw count (the number of spores counted on the sample) and a calculated concentration, usually in spores per cubic meter of air. The concentration is the meaningful number — it accounts for how much air was sampled, so results from different samples can be compared.
The indoor-to-outdoor comparison
Mold spores are everywhere outdoors, so a baseline outdoor sample is almost always collected. The key question is not 'are there spores indoors?' but 'are there more, or different, spores indoors than outdoors?' An indoor concentration significantly higher than the outdoor baseline — or dominated by a species not present outdoors — suggests an indoor source of growth.
Common spore types on a report
- Cladosporium: the most common outdoor mold; usually not alarming unless indoor levels far exceed outdoor.
- Aspergillus / Penicillium: often associated with water-damaged building materials; elevated indoor levels warrant attention.
- Stachybotrys (often called 'black mold'): associated with chronic water damage; any significant indoor detection should be investigated.
- Chaetomium: another indicator of water-damaged materials, often found alongside Stachybotrys.
What the report should also include
- A visual inspection summary noting where moisture and visible growth were found.
- Moisture meter readings for suspect materials.
- Photographs of problem areas.
- Clear recommendations: whether remediation is needed and what the next steps are.
A good report does not just hand you numbers — it interprets them. If your report is unclear, ask the assessor to walk you through it. Connect with our recommended local mold testing provider for an inspection that includes a plain-English explanation of your results.
Need professional mold testing in South Florida?
Connect with our recommended local mold testing provider, MoldXperts, for an independent assessment.
Looking for professional mold testing in Fort Lauderdale? Connect with our recommended local mold testing provider. We may receive compensation when you contact our featured provider.
About this article
This article is published by Best Mold Testing Fort Lauderdale as an independent educational resource. It is reviewed for accuracy and reflects publicly available guidance from agencies including the EPA, CDC, and Florida DBPR. It is not a substitute for professional advice specific to your property.
Get mold prevention tips in your inbox
The South Florida Mold & Healthy Home Newsletter — practical, no spam.

